View Single Post
Old 08-22-2011, 10:31 PM   #75
Bartron OP
Bike Punisher
 
Bartron's Avatar
 
Joined: Oct 2007
Location: mid-west-northern Canadia
Oddometer: 692
Quote:
Originally Posted by InHarmsWay View Post
I have all my new parts and getting ready to tear into the project. On your "Canisterectomy" and SAS removal, and constructing the 22K OHM 1/4 watt resistor, is there any specific gauge of wire that you used?

Thanks.
Sorry for the late reply. I used 18G because that's what I had around and I had the appropriately sized male and female spade connectors handy. I wouldn't worry too much as there's not much juice flowing through the wiring and the original wires are quite tiny (22 or 24 gauge). I'm no electrician and can't be bothered to look up the relationship of resistance to wire diameter but it shouldn't affect the sensor bypass - at least not when using up to 18 gauge like we did.
__________________
Ride on.

==================================
:: Furious Basterds: Velox, Vehemens, Oblivio
::
:: "For those who don't understand, no explanation is possible. For those who do, none is necessary."
Bartron is offline   Reply With Quote