View Single Post
Old 09-11-2011, 08:09 PM   #2
bmwrench
Beastly Adventurer
 
Joined: Nov 2006
Oddometer: 2,037
Airhead swingarm pins are greased with a conical grease gun tip. An old-fashioned chain saw tip grease adapter works nicely. However, the swing arm bearings on Paralever bikes are not supposed to be greased, as the swingarm vents through them.

Many Paralever bikes have no grease retainer behind the bearings and you could squirt several quarts of grease in there without it getting to the (sealed) bearings.
bmwrench is online now   Reply With Quote