ADVrider - View Single Post

Krasniewski · 10-05-2011, 08:11 PM

No joy with a new wiring harness.

Tried a new timing sensor - even though I thought it wouldn't fix the problem.

I need to check the compression if I can find a gauge to fit the MC sized spark plug hole locally... guess I shoulda done this already by now.

I have a new engine lined up, but I'm not convinced that will solve the problem.

I put a new ECU on with the old wiring harness on - so maybe that refried the ECU (doubtful it was the ECU to begin with) or it could be something else completely.

This is getting old.

10-05-2011, 08:11 PM	#27
Krasniewski ^OP I don't ride much. Joined: Feb 2008 Location: Coronado Oddometer: 950	No joy with a new wiring harness. Tried a new timing sensor - even though I thought it wouldn't fix the problem. I need to check the compression if I can find a gauge to fit the MC sized spark plug hole locally... guess I shoulda done this already by now. I have a new engine lined up, but I'm not convinced that will solve the problem. I put a new ECU on with the old wiring harness on - so maybe that refried the ECU (doubtful it was the ECU to begin with) or it could be something else completely. This is getting old. __________________ --------------------- KLRE650 Build thread. Ryca Scrambler Build. __________________ Krasniewski screwed with this post 10-05-2011 at 08:29 PM