Originally Posted by wrk2surf
Now that I have the bike together and shaking it down I notice I will have to do something with my front brake line .. I have the roadbook plate off but I see that at compression of the forks it will be banging into the plate when it is mounted...How are you rally guys running it.. I think I read or saw a picture of a longer line zip tied across the handle bars?
We run the original brake line down the right fork leg from top to bottom triple clamp, then across the bottom triple clamp to the left fork leg. Use p-clamps wherever you have a threaded hole to hold it tight in place above the bottom triple. Then the line should flex outward from the bottom triple to where it attaches to the fork slider or fork. Not so good in tight trees, but this is the correct setup for rally bikes with a lot of navigation equipment that could catch up the original brake line position.