I've got indicator led's for my blinkers working.
Also replaced the 6v 2A battery with a 7.2v 2A NiCd. Smaller, lighter and the horn does good things with the extra voltage
LED's ballasted for 12v
Work fine on 6v - A bit too bright on 12v
Showing the valve holes for chassis/wheel movement damping seperation.
All buttoned up.
Much nicer to install than on the DR650.
The fork oil drain holes are great
Now to play with shims. The damping as shipped was far too stiff. 1 0.012" shim less and it's a little too soft but better than stock.
I love this shit