Airhead F suspension question
I've got my forks off the bike doing new steering bearings - Took the whole assembly off as one piece (forks, brace, lower triple clamp).
Here's the question - Would a good wrench/suspension guru/tech be able to work on the front shocks as a whole off the bike...? I recently changed out the springs (from old Progressives to new ones), and new fork seals - but it's still got too much stiction (which may or may not have caused my high speed wobble a few weeks ago) and very little sag of any.
I figure it's off the bike and I could drop it off to a wrench/tech and save some $ since it' already off the bike. I know you need to check rear suspension while connected to the bike and I guess same for front - but figured I'd ask. I'm thinking a real old wizard with front suspensions could set it up right off the bike - or at least improve it.
2011 Duct Tape Roll
1997 Cycle Therapy mini pump
1988 Aerostich Fleece collar scarf
1992 BMW K100 transmission housing
2014 Box of General Tso's Chicken with Xtra spice