View Single Post
Old 11-27-2011, 08:11 AM   #94
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,802
Sorry Guys, I’ve made a mistake with the MK2 relocaters. The M10x70mm bolt that goes through the centre stand mounting point, the thread is about 6mm too long and may rub on the centre stands springs.

ACP just checked for me. So can you please check for yourselves, solution is to cut/file off the excess. I will get some M10x65mm bolts next week to rectify this for the new relocaters in the future and if you need another bolt please mail me and I’ll pop one in the post to you. If you have the one of the first relocaters, SE also please check.

Sorry for the cock up, but I thought the new plates could do with a longer bolt, when in actual fact the M10x65mm were fine in the firsrt place. I haven't got a centre stand on my bike so sorry I missed this.


Name:  bolt2.JPG
Views: 2715
Size:  66.0 KB
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.

charlie264 screwed with this post 11-28-2011 at 11:04 AM
charlie264 is online now   Reply With Quote