View Single Post
Old 12-03-2011, 08:31 PM   #1958
Poolside OP
Syndicated
 
Poolside's Avatar
 
Joined: Apr 2003
Location: Long Beach, CA
Oddometer: 11,824
Quote:
Originally Posted by DidYouSeeThat View Post

Poolside
Is it bad to cut and extend the wires on either side or both sides?
Say 12" longer....
Sure, that's fine. Either or both.

But you know, you guys are making a big deal out of this adjustment thing! Seriously. Your desire to make a lot of adjustments has more to do with your predisposition say, than any significant requirement.

I made the IICE Air adjustable primarily to allow the it to work with the upcoming IICE Cool. The primary reason for the adjustment is the -20 temperature setting is too much when the IICE Cool is installed. The IICE Air needs to be set at the -10 Intake Air Temperature offset to work with the upcoming IICE Cool's Transient Throttle Enrichment.

So I'm thinking that before making any changes, you could try leaving it at -20 for a good while. Maybe a month. Then try the same at -10 and -30. Then you'll know what I'm talking about.

But, if you want to enjoy making changes, you won't hurt anything. I'm not trying to dissuade you or anything. Only that it's sort of unnecessary from my point of view.




__________________

IICE Air Hotrod your GS  Fuel Injection  Tech Info  Buy  Order List  Installation

Poolside screwed with this post 12-03-2011 at 08:38 PM
Poolside is offline