View Single Post
Old 12-16-2011, 10:01 PM   #53
eakins
Butler Maps
 
eakins's Avatar
 
Joined: May 2002
Location: Fort Collins, Colorado
Oddometer: 17,680
my IMS petcock > filter > oem carb (inlet in original position) setup.
works great and i've gotten to 1/2" of fuel in the tank and zero flow issues (loop is not a problem).
ziptied at the exit of the filter and wrapped around the carb inlet to keep the tube tight and back under the tank. inlet filter is gone. IMS petcock filter catches most of the debris and this filter gets the rest.
IMS petcock works great, used washers on the tank bolts and snugged down the small philips when 1st installed. Haven't touched since, after 2+ years no issues. See no need to upgrade to raptor petcock.
Attached Images
 
__________________
Butler Maps - motorcycle maps for riders by riders -
Alaska
AZ map COBDR AZBDR IDBDR South East map
http://www.advrider.com/forums/showthread.php?t=598717
Butler Maps website:
http://www.butlermaps.com

eakins screwed with this post 12-16-2011 at 10:07 PM
eakins is online now   Reply With Quote