Ok, I found out why I was unable to paste pictures the last few days, it was because I was using Google Chrome and GC does not allow the right click copy function.
So here are the ebay switches, left hand is in excellent shape, right hand looming a little funky and slightly broken at cable adjustment thread, but will use epoxy and attempt to salvage that function;
Cleaned up the right hand loom, removing old hardened looming and retaping, then attached a fish wire to thread the harness down thru the handlebar;
Then the same fish wire process on the left side bar;
Both switches ready to begin wiring process;
Also charged battery last night, tonite I'll start hooking up all the wires and testing to see what does or doesn't work.