View Single Post
Old 12-21-2011, 08:12 PM   #9
Joined: Aug 2010
Location: La Verne CA
Oddometer: 82
Have you thought about rigging up a less obtrusive oil tank? Are you able to weld a cap to the backbone of the frame and put a nipple at the lowest point to attach the oil feed hose to? You may have to get creative as far as a filling hole though. I did this once to eliminate the oil tank and moved the fuel tank back about an inch then fabricated a fill orifice at the very front of the backbone with a cap. Held about 2 quarts. Similar to the brit oil-in-frame set up.
LotaBikes is offline   Reply With Quote