View Single Post
Old 12-23-2011, 08:33 PM   #121
drc42
Rally Dreamer
 
drc42's Avatar
 
Joined: Apr 2009
Location: New Hampshire
Oddometer: 1,719
Made some more progress. I fabed up some 3/16" aluminum. Just some simple bends to make them match the width of the stock headlight. Still just figuring it out as I go, I suspect I am going to use it for a while and scrap it for a re-design. I figure I won't really know what works until I try.







Next steps will be to fab up a riser bracket which will old the speedo, gps, and eventually an ICO and roadbook. Fab up a bracket that will mount the faring, and of course create the fiberglass faring itself.

Hope to get some good progress done over the next week or so. I need the bike to be ready in time for Sandblast Rally in February.
__________________
follow my journey: Dreaming of Dakar
Special thanks to my sponsors:
Freedom Cycle of Concord NH BRP Renazco Racing MX1West
Help support my racing addiction and look cool doing it! Buy a T-shirt or hat from the Dakar Dream Store
drc42 is offline   Reply With Quote