Originally Posted by Steveman
Possibly he's right, the Bosch guy said he thinks that about 100C is close to the upper operation limit but he did not know for sure. Maybe someone can figure out the proper values. That may help to find out how far we are away from -let's say - an acceptable temperature window....
You might be right...... But I find it strange though...... As that is an easy reached limit...... Even for room temp cured epoxys. The epoxy I use that require post heat cure has a upper temp limit of about 250 deg C. And wont break down until 325deg C. That same epoxy is in fact used in potting.....