Originally Posted by planktonnn
I'll have a look & get back to you, I need to drop the cam cover off & see if I re-tightened the head bolts, but it'd be usefull to know what the torque setting is?
For a K75
Head bolts -
bolt threads lightly oiled
1st stage , 22 >< 3 ft-lb
2nd stage , after twenty minute wait ( don't look at me like that ... it's in the book ) 33 >< 4 ft-lb .
Cam bearing cap bolts -
cam sprocket bolt -
Be thankful you didn't touch the big end bolts