View Single Post
Old 02-09-2012, 11:57 AM   #71
Joined: Sep 2011
Oddometer: 50
hi, at least here (Czech republic - central europe)
programming of the machine (according to my CAD drawing file - actually I think it was somethink like copy/paste method :) ), laser cutting, material - all together cost me about 430 CZK which is about 20-25 USD

just if I would do it once again I would probably put there some paint coating... because that aluminum alloy is quite weak and when there is something attached to the rack it moves slightly during the ride and it makes the attached stuff dirty (aluminum dust or something like that... so at least some transparent paint coating is not a bad idea)
my blog:

bmw-gs-rider screwed with this post 02-09-2012 at 12:09 PM
bmw-gs-rider is offline   Reply With Quote