View Single Post
Old 02-20-2012, 03:34 PM   #43
TrophyHunter
Beastly Adventurer
 
Joined: Aug 2009
Location: San Diego
Oddometer: 1,781
Very fast service and good follow up by Brian. Quality product and BRIGHT.

I copied hmmwv15's placement but used a different mount. These are mocked up only and not at their final angle, etc. I "fired 'em up" for a short period - they'll be more than enough. Some may think it's overkill but I plan on doing some night rides off road so I'll put these to good use. Also working out a quick disconnect on wiring and mounts so I can swap 'em between the DR and the Strom.


Sorry for the odd backdrop but didn't feel like dragging the bike out for the pic. It's tucked in between my Strom and son's DR.

The mounts I used are from http://www.vee-strom.com/blog/parts/...v-strom-parts/ Richland Rick. They have a 3 hole version (spot, mount to mirror hole, Ram ball) I put Ram ball mounts in one hole and used the other for the spots. They mounted up to the DR mirror holes with supplied hardware. I use the Ram balls to mount my Double Take mirrors - http://www.advrider.com/forums/showthread.php?t=571500

I also bought a set of mounts for the Strom but just using them for mirror extenders and Ram mount bases for accessories. I'll probably mount the spots similar to the Beemer pictured on this thread.

Thanks again Brian for a good product at a fair price...& great service.
__________________
www.dualsportmoto.com
2005 DR650 2003 DRZ-250
2013 HD Road King

"It's a small amount of gas, but it represents a long walk" My Dad...

TrophyHunter screwed with this post 02-20-2012 at 03:56 PM
TrophyHunter is offline   Reply With Quote