Ok and so in continues. With the wiring cut down to a bare minimum, it was time to make fit the better 2 stroke exhaust that came with the bike. It had the standard exhaust which doesnt really have a expansion chamber to speak of, but the other exhaust provided would need to be modified slightly to fit the barrel. This was a simple job of cutting off the flange from the standard header and welding it to fit the two piece expansion chamber set up. There had to be a few modification to the end to fit around the frame, with the addition of some lugs to secure it from rattling round. So to speak. The silencer at the end had been made and by the looks of the inside of the pipe never been used, so a quick shorten of the pipe, a joiner piece to mate them together snuggly, and bobs your uncle. New exhaust. Just hope it produces the right amount of power. has to be infinately better than the standard one.
Unpainted as yet. but I think it will be functional