View Single Post
Old 03-07-2012, 12:47 AM   #9
gsd4me OP
90% bluff
gsd4me's Avatar
Joined: Dec 2005
Location: Brisbane, Australia
Oddometer: 7,661
Well, the goods haven`t arrived from the UK yet, and I don`t know what they will cost, but I do know that the freight is costing 600 Pounds . The frame is the main culprit, so the charge is for volume, not weight.

A pallet has to be made for the bits; Ray said he should have ordered things likes guards and other bits and pieces that could have been sent as well for no more cost, but as he`s ordering all the time for his other jobs, it`s not a problem.

"We" have decided that the bigger carbs and pipes will be used; the engine will be the same spec as Ray has on his "R80GSPD", which has more grunt that any (normal) airhead person would need, but goes like the clappers and still uses 91 RON fuel (our lowest octane, without ethanol).

Next update should have the parts on Oz soil, in a week or so.
David Hunn:
R100GS Ray Peake special.

gsd4me screwed with this post 03-07-2012 at 03:03 AM
gsd4me is offline   Reply With Quote