Found the house smelling of fuel, dug in with a flashlight and the screws just above the accell pump are leaking, shooting fuel out with a throttle twist but dripping the rest of the time. The fuel was pooling between the cylinders, a line of gas down the left side cases and evaporating before hitting the floor. Glad I caught it before it blew the house up with fumes at the furnace in the next room! BOOM!
Sudco tells me those are drilled/tapped to install the leak jet and were supposed to be epoxied in. OK, someone missed that step. Epoxy drying as I type, check this if you get these carbs!!!