Next we need to run a power source from the battery at the back of the bike...
First we fish a conduit sleeve to the back and run a red & black wire in it.. shrink wrapping the end.
We want to have this power source fused in case of a short.
Fish the two wires through a fuse holder and solder/crimp the connectors
Lock them into the waterproof housing
insert fuse...
put the cap on and mount
Now we are ready to put the two shrink wrapped eyelets on the battery
...to be continued... it'll all start to come together!
...but first I'm going to have to rewire how the thermostat works
KTM wiring =
...to be continued...