Originally Posted by marcel
This started after and oil change, When I would acc... hard 1 to 3 the bike would start poping and stalled. Mine is and 04 with the crap remove. I figured that a vent line was pinch to the frame rails, after three removale of the tanks, I couldn't find anything wrong with the vents and the problem was still present so I decided to blow some shop air in vent and voila the anoying promblem was gone. Has anyone seen this before with there 950?
Sounds like your carburetor vents that are clogged with oil from the crank-case breather. Check your oil level - it may be too high...