Originally Posted by sagedrifter
That's the usual set up for a free flowing exhaust.
30 mpg is very bad. I would fix that now. Check your oil and make sure your not dumping fuel in the sump.
Its probably a leaking petcock or dried out o-rings on the float. Maybe a worn float needle too.
Procycle sells a refresh kit with the rubber parts.
Float height needs to be .58" and make sure its all air inside. Old floats can leak and get heavy.
I would guess its the o-rings.
Sent from my GT-S5690L using Tapatalk 2
I've got a stock exhaust, what should my jetting be?
It runs fat, no choke required at start so I think I'm fighting a jetting problem. No fuel in the oil and the float is high and dry.