Thread: 70's ISDT BMW
View Single Post
Old 04-30-2012, 07:33 PM   #1
isdt BMW OP
willserv@aol.com
 
Joined: Mar 2010
Location: N. E. Ohio
Oddometer: 213
70's ISDT BMW

OK, Here is the deal. Just bought a R-60/6 frame, motor, trans, swingarm, and subframe. Building an ISDT replica, want to keeep the long wheelbase, and trade the subframe for a short one. Any trades out there? Have a set of Husqvarna forks, wheel and triple clamps. Have IMS footpegs and holders off of a Cannondale. Have a set of Works dual spring shocks one inch longer than stock BMW. using Acerbes front and rear fenders, Preston Petty headlight/numberplate. Have Enduro rubber taillight liscense plate holder. Will cut and lengthen framestand. Making highpipe 2 into1 exhaust with alloy spark arrester muffler. Using Husky enduro speedo and drive. Using Clark plastic gastank. Making alloy skidplate. Need some photos of 70's ISDT bikes.

You may have seen some photos of my 1957 ISDT replica (some posted on this site) I broke my femur and need a taller button start bike. Will use as little wiring as possible and still maintain E start. May try to modify a Husky seat to fit. Any ideas welcome

Thanks, Bruce
isdt BMW is offline   Reply With Quote