Originally Posted by Tucos
Right, but it angles down and the fender is higher than the bottom of the triple. Fender is loose in the pic, tight looks like the bracket is going to snap. Also the brake lines are tight against the sides of the fender.
Gotcha. I remember running into that as well. There are a couple options to help: One that I did was to invert the two front metal fender bushings so the front of the fender sits a little lower. Another option is to cut the plastic thing that holds the brake line T in half. Then you can rotate the two pieces outward to give more clearance. I didn't do the second one, I figured I'd see how everything was working before I did that- so far no problems.