View Single Post
Old 05-10-2012, 07:25 AM   #4
Beater
The Bavarian Butcher
 
Beater's Avatar
 
Joined: Sep 2009
Location: Atlanta, GA, USA
Oddometer: 3,522
Quote:
Originally Posted by DiabloADV View Post
Some strangeness...

Pistons measure 93.3mm. Cylinders 93.7mm.

Book says R90/6 is 90mm. 100's pistons are 93.96mm (or bigger for overbores...).

So...what the heck do I have here...?

Any help....?
You had a 0.2mm gap all the way around? That seems high to me ... Both cylinders?

Not to be a jerk ... but are you sure you're reading your caliper right? If it is correct, then it's a WAY overbore on an R90 ... but I'll bet that it's a R100.set though.

Just tryin to help ...
__________________
Fred <|> Need an Airhead Part? .... I May Have It!
'85 BMW R80RT G/Sified <|> '73 BMW R75/5 LWB <|> '94 MZ Silver Star Hack
Beater is offline   Reply With Quote