View Single Post
Old 06-05-2012, 11:20 AM   #10
men8ifr OP
Gnarly Adventurer
 
Joined: Jan 2008
Location: Midlands UK
Oddometer: 383
I will have to try again - I'll try to take some pics and let you know O ring sizes etc.

Re the allen bolts all I know is it's a U.S size and was standard in a small set of allen heads I got in the UK so should be very easy to find in the U.S. Also re the O rings a $10 O ring kit with say 20-30 different sizes should have all you need.

Regarding the re-filling and getting air out all I do is fill as much as possible and re-assemble then turn the unit upside down, remove the 2 small silver cross head screws and pour a bit of oil in each then move the damper arm slowly left to right adding oil at each screwhead for 20min and all teh air should be out. Check by setting the damping to max and moving the arm by hand left to right - you should feel no free play in the arm around the centre.
men8ifr is offline   Reply With Quote