View Single Post
Old 07-01-2012, 09:36 AM   #16
RhodeHazard OP
ex halligan hooligan
 
RhodeHazard's Avatar
 
Joined: Mar 2010
Location: Off-Rhode Island
Oddometer: 658
Quote:
Originally Posted by Pariahtize View Post
This is gonna be fun

I did the same with the bushing washers on my risers And I do need to extend my bars more, so may look at the Rox.

You can raise the front fender just a bit? it looked like the crossover brake line was too tight. Is there a link to htis (slight) mod?

Good luck, and good looking bike!
Thank you... here is the post from http://advrider.com/forums/showthrea...=772522&page=4

Quote:
Originally Posted by Suncruiser View Post
Here's some photos of the low fender raised 35 mm higher. I used some leftover flat CF strips as extenders.
Pretty straight forward. 15,000 km later, all is good.





PS: CF leftovers from home made panniers, rear mudguard, extendable windshield and bash plate.
__________________
Ernie Young
'12-KTM-990adv '02-KTM-400exc '81-HONDA-XL185s
MotorBikeArtist.com motorcycle drawings * Turf & Surf: NE-NB 2011
RhodeHazard is offline   Reply With Quote