View Single Post
Old 07-06-2012, 04:06 PM   #5
stainlesscycle
Beastly Adventurer
 
stainlesscycle's Avatar
 
Joined: Jun 2008
Location: morgantown, wv
Oddometer: 1,996
you can do a squish check without removing head - just gently feed some solid core solder in with an 'L' bend through spark plug hole.. it works for quick and dirty check (be careful not to cut the end of the solder off on a port!) - then just turn over motor gently by hand at ignition rotor.. pull the solder out and measure..
__________________
current bikes
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more
stainlesscycle is offline   Reply With Quote