Originally Posted by One Less Harley
just need to figure out if the hose will be a hydraulic hose or a heat pressed on hose to the banjo fitting. Heat pressed hose will be cheaper, lighter and won't come off easily.
I just used some extra 1/4" fuel line I had lying around. I used the banjo fitting like a barb and just slipped the fuel line over it. It's a REALLY tight fit so nothing's getting in there. Just curious, where'd you find the plug? Just be careful that it's nothing too long as if it threads in too deep it'll grind on the crown gear. I remember it being a very close fit.