View Single Post
Old 08-03-2012, 04:15 PM   #199
motosavant
Master Lurker
 
motosavant's Avatar
 
Joined: Sep 2007
Location: Alabamistan
Oddometer: 5
KTM/Husky Upside Down Front End For Sale

FOR SALE, a front fork assembly from a mid-90's KTM/Husqvarna that has already been modified to bolt on to a BMW Airhead frame.Steering stem was modified by a professional machinist to accept stock BMW bearings.
54mm triple clamp hole diameter, 40mm fork leg diameter, with axle and Brembo brake caliper.
Adjustable dampening via knobs on top of forks and click screws at the axle ends.No apparent leaks from seals.
NEW FORK SPRINGS WILL BE REQUIRED, since this front end was originally set up for a much lighter bike.
I've done no development past getting the stem and bearings right,and I have had it assembled to a frame to verify.
Beyond that it's ready for someone to finish their project that I decided not to build.
PM me for pics, I don't have any ability to post photos here,will gladly send detail shots if requested.$450.00, expect about $50.00 shipping in the US.
__________________
Don't question authority-they don't know,either.
motosavant is offline