View Single Post
Old 08-11-2012, 02:11 PM   #87
woody's wheel works
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,298
simply a swap????

Quote:
Originally Posted by MMMOTORCYCLE View Post
I was about to put my GS-Adventure up for sale to buy a more off road worthy 990Adv when I saw this post!

I want to clarify that this is simply a swap and i can swap back and forth between the 21/18 and stock 19/17 without issues. I put Ohlins on earlier this year...issues with the 18 rear rubbing?

In addition to Woodys wheels...i would need brake rotors, ABS ring, anything else?

As for the front fender removal. Would a piece of pre-filter foam zip tied inside the fairing work? (might be eaier to show in a picture than me trying to describe)

Mike
hi ,,,the mandatory stuff that needs doing

1,,if ya go here you'll see that wasp-man describes the modification to front sensor holder plate somewhere in here:
http://www.advrider.com/forums/showthread.php?t=778809

or here.
http://www.advrider.com/forums/showthread.php?t=759952

essentially removing 1mm off the inside corner of the plate,,

2,,there's the bit about getting a higher fender

3,,and the front brake line kit wasp-man designed

4,,i think that's it,,reguires no special tools,,,once done ya can swap whhel assys in minutes

woody
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W

woody's wheel works screwed with this post 09-17-2012 at 02:08 AM
woody's wheel works is offline   Reply With Quote