View Single Post
Old 08-13-2012, 01:02 PM   #28
One Less Harley OP
One Less Harley's Avatar
Joined: Nov 2006
Location: Bowling Green, Ky
Oddometer: 4,744
OK, everything's here and they are ready to go out. Only 3 left. (08/17/2012) Comes with FD adapter, banjo fitting and bolt, three crush washers, three cable ties, and 42" of black nylon hose. Price is $42.00 which includes shipping to the USA. PayPal only if paying as a gift, this is to avoid the pay pal fees.

Suggested routing--be careful and don't kink the nylon hose, it's not as flexible as rubber, but should last longer.

From FD under shock mount on right side-

Then up through the hole near the frame tubing and use a strip tie on the hose just on top of where the hose exits the hole. Don't put a strip tie at the first hole (marked off in red), if one is used here, the suspension movement will pull on the hose. With the strip tie near the frame, this is more at the pivot point and pulls on the hose less.

Then up by battery into the back bone of the frame next to the frame pump.

2004 BMW R1150RS
1984 BMW R80G/S
(wrenching index)
2003 Suzuki DRZ 400S (TAT Prep)
One More DRZ does the TAT (Ride Report)

One Less Harley screwed with this post 08-17-2012 at 12:01 PM
One Less Harley is offline   Reply With Quote