Thread: H-1 Project
View Single Post
Old 08-25-2012, 04:33 PM   #39
Beastly Adventurer
Joined: Jan 2012
Oddometer: 1,673
Replace all 3 condensers, as having the wrong coils fitted will almost certainly have damaged them. Pressure test the motor before stripping it, as this will determine exactly where the leak is, and will save an awful lot of work.

You will also find that bikes pretty dangerous in the turns, as moving the shock mounts and fork tubes, will have reduced ground clearance quite a bit, and will mean center stand, pipes, and footrests will all ground out very easily.
Twin-shocker is offline   Reply With Quote