View Single Post
Old 09-18-2012, 11:59 AM   #1
Baja Designs OP
Baja Designs
Baja Designs's Avatar
Joined: Jan 2012
Location: san marcos, ca
Oddometer: 679
New Baja Designs Onx LED light!

After years of engineering and advances in LED technology we at Baja Designs can proudly say that LED lights are officially the future of off road racing. The new OnX LED Light Bar is the only light bar on the market that has the distance of an 8” HID with the smooth spread of an LED. The OnX is available in 8” increments ranging from 8” all the way to 51”. Each 8” increment offers a concentrated beam of 3600 lumens. Countless hours of testing and preparation have ensured that the OnX will be perfect for racers and enthusiasts that need a vast amount of light at high speeds. The OnX will utilize a Cree XML T6 Bin LED at 5000k, which will be complimented by our one of a kind user changeable optics that have been specifically designed for the OnX’s HID like distance projection. If you’re looking for the guaranteed farthest projecting LED light on the market, look no further.

Patterns : Long Range Spot, Standard Spot, Driving Combo and Wide Cornering Combo.
  • Both Spot and Horizontal Spread Optics can be combined in one lamp
  • Optics are user changeable
  • Tri-Level Heat Management system
  • Weight: 2.5 lbs
  • IP68 (Submersible to 9ft)
  • User Changeable Polycarbonate Lens
  • Lifetime Warranty


  • Dimming: Accessible Medium (Dust) and Strobe Modes
  • Total Lumens: 3600
  • Housing: Extruded Aluminum, Anodized, Laser Etched
  • Power Consumption: 42 watts
  • Emitter: CREE XM-L LED, 5000 Kelvin
  • 8.0” Long, 2.25” High, 4.25” Inches Deep
  • 50,000 hour LED life expectancy
For those of you guys who would like to mount a Baja Designs 8" Onx on an adventure bike here's the 8" mounted on a Yamaha Super Tenere. The circuit board on the Onx includes the 100%, 50% and strobe modes

There is two harnesses available for the Onx one with a mode switch two change from 100%, 50% or strobe. Can be wired into the high beams or a separate on/off switch.
The second harness will work with either high beam or separate switch and a dimmer can be wired in.

Here's the link to check out the Onx on our website
Please let me know if you have any questions and don't forget about the ADV discount
760 560 2252
ext 101

NOTE: The night shot below isn't as yellow as in person, we will have some better night shots soon.

Baja Designs screwed with this post 09-18-2012 at 01:29 PM
Baja Designs is online now   Reply With Quote