Quote:
Originally Posted by GH41
First question.. Is the distance between the of the jamb nut and inside of the adjuster bolt on both sides the same? You will need a caliper to measure it. If it is and the bike doesn't run straight you may have to have your back looked at. GH
|
I can't get my calipers to measure between the adjuster and the jamb nut but did measure both sides between the aluminum part the adjuster bolt touches and black plastic the jamb nut touches. The left side is just under six mm greater but with this difference the bike tracks straight.
I'm trying to remedy this myself without dealer help because I have a 2012 K1600GT that pulls to the left and my dealer is going to label me as a whiney problem customer if I also complain about the 650.