So, thanks for the write up, I used it this weekend, but had some questions for all you veteran riders out there.
First off, this was about the 4th fork seal job I have ever done, and it was much easier than any other bike I have ever done.
This is on the leg that was leaking. I cannot feel anything, no change in resistance, no edges, uneven surfaces, nothing.
It looks like the chrome is rubbed off.
Something I should be worried about?
Bike has about 21,500 miles on it. The leg was only leaking for about 200 miles and for about a week. It still had lots of oil In it, and it was still producing oil while riding around and sitting, so it wasn't dry.
By the way, I used the 45mm Marzocchi Kit from www.dualsportarmory.com
and it fit like a charm. Exact same size seals as the stock ones.