Jetting with CPR
Installed CPR filter setup on 04' 950S, elevation 510 ft, Akras with inserts in place.
180 main in front
185 main in rear
65 idle air jet front and rear
45 low speed jet front and rear
4mm float set
FP needle at 3rd clip
Idle hangs slightly so to attempt correcting this my IMS are 3.5 turns out but still having idle hanging.
Going in on the IMS makes the hanging idle worse.
Bike cruises fine with no surging but does not have real crisp throttle response like it did with air box and pre-filter.
Seems down on top end power as no power wheelies are happening. No bogging or stumbling.
Any suggestions on where to go from here ?
2004 KTM 950 Adventure S
2007 Ducati 999S Parts Unlimited
2012 Ducati Multistrada 1200 Pikes Peak
Goss screwed with this post 10-06-2012 at 01:31 PM