View Single Post
Old 10-11-2012, 06:21 PM   #11
Beastly Adventurer
Joined: Oct 2007
Location: central USA
Oddometer: 6,515
To test crankcase you normally do not want to use more than 10 or 20 PSI. Use soap suds on all the seams and seals and look for bubbles, lots of bubbles.

The exhaust should be hooked yup. some porting schemes need an exhaust to run.

It could also be retarded timing easy to check with light.

Could also be a severe vacuum leak.

ragtoplvr is offline   Reply With Quote