View Single Post
Old 10-12-2012, 07:19 PM   #5
mark1305
Old Enough To Know Better
 
mark1305's Avatar
 
Joined: Feb 2005
Location: Merritt Island, FL
Oddometer: 5,857
Yep, can be done on the bike, but rather than pry the seal out with a blade, you may want to get a couple (as in just two) small self tapping screws about #4 or #6 and screw them into the seal then pull it out with pliers or vice grips on the screws.

One method works for some folks, and the other works for some folks.
__________________
Mark J
Merritt Island, FL

When a person asks you for advice, they don't want advice. They want corroboration.
mark1305 is offline   Reply With Quote