Originally Posted by TuefelHunden
If you are hooking them to the low beam, which means they are on all the time, why not hook them directly to the battery and maybe put an on/off switch inline. That way there is no effect on any headlight.hooked to the ZFE.
I think you missed my purpose for considering running them that way. I'm trying to eliminate the LAMPF errror without wasting the current in a resistor or other non productive device. If I just unplug the low beam and run everything off of the battery via a switch it will work fine but I'll have a consistent LAMPF on the computer. As is my Denalis are run off of a relay from the battery but I'm still using the standard H7low beam.