Originally Posted by Twin-shocker
If you use a syringe to bleed brakes there is no need for this, and no chance of the banjo bolt snapping when its being tightened.
When the banjo bolt is not in the correct position it does not matter what method you use to bleed the brakes, you can not flush the air bubble out. That is why the mod works, the nissan MS used to replace the standard brembo MS has more than one hole.
This has been documented on the interweb and this fix is apparently the solution to the problem, later today I am going to the mx track to test my brakes and I will report back on the findings.