Originally Posted by splisken
count me in on the quick disconnects when you do get that far...#1 in!
Originally Posted by PowerCell
I never liked the crossover in the first place. I recomend dumping it and running both sides to a Y connector in the valley between the carbs. The fuel pump can lift the fuel the few inches needed.
As a side note, I'm actually getting ready to do a first run build of my quick release connectors. I've worked things out with Colder Products on sourcing the needed parts and our first build will be 100 sets. No price or delivery date just yet...
So is the female part here a standard CPC part threaded into a flange, or is the whole part custom with some CPC internal components and button?
2011 KTM 990 Adventure R
2010 KTM 530 EXC
2009 KTM 950 Super Enduro Erzberg Edition
Yardstick screwed with this post 10-23-2012 at 04:08 PM