View Single Post
Old 10-24-2012, 09:24 AM   #1
Bigtoy302 OP
Bigtoy302's Avatar
Joined: Oct 2012
Location: Eugene, OR
Oddometer: 12
Billet LED light bars

These light bars are my latest creation.

Machined from solid 6061-T6 aluminum in house
7.875"wide,1.875"tall, 3"deep 2.8LBS Anodized black
6 Cree XM-L LT5 5000k LEDS
63 watts
12-22 Volts
Reverse battery protection
Micro controller
Thermal protection at 158F 70C
Changeable Optics
Abrasion Resistant Polycarbonate lens

Lights are made in house in the USA

High, Low and strobe modes accessed from a single ground momentary switch.

Standard hook up is connecting the power and ground directly to your battery and the mode wire turns it on/off selects modes.

Option power:
Light will turn on high when power is hooked up. Use this option if you want to wire the light to a relay and power it from switch like your high beams.

Lights will come with brackets of your choice: Weld on flat, Weld on 1.75" tube, 304 stainless L

Light comes with 10ft of wire. You will need to provide a fuse and switch.

On my Drz400 I have it hooked to the battery and use my old push button kill switch to turn on the light. This light makes night riding fun

$350 Each

RyDel Fab Led light bar operation - YouTube

RyDel Fab


Bigtoy302 screwed with this post 10-08-2013 at 06:33 PM
Bigtoy302 is offline   Reply With Quote