The Emig racing F800 kit is a set of custom billet triples that I have specced with bores to suit Showa RMZ 450 forks. They come with top and bottom triple, stem, steering damper, and bar clamp.
I already have the forks, so it's a bolt up job. The axle will fit the right hand fork leg as is, and the left hand leg with a sleeve.
Standard wheel, standard spacers.
I make a bracket for the ABS sensor. Run single disc, with a caliper that fits the RMZ mount. I have a 4 piston caliper in mind.
Eventually I upgrade the disc to a 320mm one with after market motard caliper spacer.