Originally Posted by JimVonBaden
Before you take it apart, do a thorough flush of your brakes, then disconnect each electrical connection, clean it and reconnect it. Make sure your sensors are gapped right, and all your switches are working correctly. Also, check all your battery connection, and make sure you battery is fully charged. Not as critical on the non-Servo ABS, but it still matters.
IMHO it is very odd that it broke right after getting it worked on.
Thanks Jim. It occurred when I first pulled into the dealer not after they worked on it. Can you point me to a description of how I get to/remove the module and the process for checking gaps on the sensors?