View Single Post
Old 11-02-2012, 12:57 AM   #9
Dustodust OP
Studly Adventurer
 
Dustodust's Avatar
 
Joined: Oct 2009
Location: Hillsboro Oregon
Oddometer: 796
Quote:
Originally Posted by eakins View Post
there is also a madstad/aeroflow adjustable screen version too
http://www.aeroflowscreens.com/KTM990950.htm
http://www.madstad.com/s.nl/sc.7/category.1971/.f
I like the adjustable height option of the madstad
it looks like it might only take a minute to unscrew the four nuts then line it up and screw them back
I like the way I did mine I just loosen the knobs and push it down or pull it up and tighten , five second deal , no nuts to drop , dont even have to get off the bike

acrylic is inexpensive, harder than lexan, doesnt scratch as easy, but it is ridgid and shatters like glass AND it is harder to shape

the quality set up is hardfaced lexan IMO, but it is expensive , like properly done carbon fiber
(theres is a lot of crappy carbon fiber out there that isnt as strong as it should be)
__________________
04 KTM 950 S
04 KTM 525 EXC street plated
Dustodust is offline   Reply With Quote