View Single Post
Old 11-03-2012, 06:00 AM   #33
spo123
Man About Town
 
spo123's Avatar
 
Joined: Nov 2006
Location: North Shore Mass. USA
Oddometer: 679
Cool2 It just takes TIME and Patience!

If the valves are adjusted correctly AND the timing is correct, it may NOT be possible for a proper warm up ride......IF spark to the plugs is ERRATIC.
FYI....as I previously stated.......double check all electrical connections (in IGNITION SYSTEM)......use an ohm meter to test the PLUG CAPS....
The ORIGINAL METAL CAPS are known to FAIL and pass no ohms....ie: infinite resistance.
Replacement NGK BRAND caps are INEXPENSIVE.......There IS a difference of ohms for POINTS and for ELECTRONIC ignitions.....YOU may look that up....it is easy to find.
Best wishes always!

spo
__________________
spo
1973 /5 LWB Toaster

spo123 screwed with this post 11-03-2012 at 01:46 PM
spo123 is online now   Reply With Quote