View Single Post
Old 11-03-2012, 10:35 PM   #48494
Spud Rider
Beastly Adventurer
 
Spud Rider's Avatar
 
Joined: Jun 2008
Location: Idaho
Oddometer: 3,600
Quote:
Originally Posted by ReferJohn View Post
I don't have a Vapor,, nor do i plan to get a Vapor.
does the TrailTech you mentioned have it's own display reading
or is there another company that makes a temperature sensor
I already have a XR's only dipstick
You can buy a Trail Tech, TTO Temperature Gauge.

http://trailtech.net/tto_temperature.html



I installed a TTO Temperature Gauge with the BSPP 1/8-28 temperature probe when I installed my oil cooler.

http://www.advrider.com/forums/showthread.php?t=781962







I believe you want the 10mm cylinder head temperature sensor if you wish to mount the sensor on the banjo bolt for the external oil line to the cylinder head.

http://www.trailtech.net/7500-3010.html



I see Trail Tech is also offering an M12 bolt which will probably fit the oil drain plug on the crankcase.

http://www.trailtech.net/VA-12150.html



However, you would need to run a long wire from a BSPP 1/8-28 temperature probe to use this 12mm bolt.

Spud
__________________
2005 XR650L: Shorai Battery Relocation, Spud Oil Cooler, XR650R C/S Sprocket, Reinforced Subframe, Chain Slipper Roller, Performance Design Lowering Link, Baja Designs Headlight, FMF Hi-Flo Header, ManRacks SD Rack, ManRacks Front Fender Farkle, CST Surge I Front Tire, D952 Rear Tire, Tusk D-Flex Handguards, Uni Air Filter, No-Toil Evolution air filter oil
Spud Rider is offline   Reply With Quote