View Single Post
Old 11-08-2012, 12:34 PM   #32
Beastly Adventurer
Joined: Sep 2011
Location: Tulsa, Oklahoma
Oddometer: 6,443
Originally Posted by ME 109 View Post
Welding the stand won't help get the bike on the stand. It will help getting the bike off the stand, which when fully loaded for touring is very difficult if your stand is crapped out. (/7)

What will help getting the bike on the stand are pivots in good order, technique, and a mechanism designed to work properly, for human strength.

A stand that does not lift the bike very much will be easy to use on a hard surface. The same stand will be useless on uneven ground or soft surfaces.

Try getting a loaded bike off a 'good' centre stand in soft's difficult.

I think a c/stand has to be tailored to suit the individual rider.
OK... thanks for confirming what I thought to be the case. just so happens my stand's pivot is in good condition not wallowed out, greased. have never had any problems getting bike off stand, loaded or not. the fun part is getting bike on center stand....
_cy_ is offline   Reply With Quote