View Single Post
Old 11-11-2012, 08:00 PM   #25
bomose
Beastly Adventurer
 
bomose's Avatar
 
Joined: Jul 2007
Location: Hoover,Al
Oddometer: 1,039
Quote:
Originally Posted by Brown Dog View Post
My SE has did this since new, but i solved it :

Simply get in the habit of working the clutch lever in & out multiple times AFTER cold start ups before putting bike into gear

It works oil into the clutch disc that runs out while sitting.

Problem solved
I was doing the same thing for that problem. But sometimes when riding with others I didn't have time to wait.After stalling and almost falling down I decided to do something about it. I found the inner steel plate had a ring worn in it and replaced it. I also cleaned the oil jet and put on an Oberon slave cylinder. I'm not sure what did the trick, but it now works smoothly and will shift into neutral easily.I used 5w BelRay fork oil in the clutch master cylinder.
__________________
I prefer a short life with width to a narrow one with length-Avicenna
http://www.advrider.com/forums/showthread.php?t=810149 Ouray Adv
http://www.advrider.com/forums/showthread.php?t=800723 Cortez & Moab
http://www.advrider.com/forums/showt...=955211Chasing Dinosaurs
bomose is offline   Reply With Quote